About

Hardware design and R&D engineering — from concept to a board that works in the field.

I work in electronic hardware design and R&D. I carry a board end to end, from the schematic stage through to the manufacturing files, without the work having to be divided along the way.

I founded ANSATEK in 2019 with TÜBİTAK support and directed its hardware development and R&D activities until 2025. During that period I designed control boards, battery management systems and sensor-fusion modules, in stack-ups ranging from two to six layers. I carry out my designs with reference to IPC-2152 and IPC-2581, addressing impedance and length matching on high-speed nets, and current paths and thermal behaviour on power stages, at the design stage.

The initial development period of EKASS.AI, an AI-assisted pedal assist system, was supported by KOSGEB. During the same years I provided technical consultancy on the preparation and execution of projects from various sectors, within the scope of several institutions and support programmes.

At the end of 2025 I took part in an EU/IPA-funded public transport project at the Directorate General for EU and Foreign Relations of the Ministry of Transport and Infrastructure. I prepared the technical specification for an automatic passenger counting system and ran the supplier evaluation and technical procurement processes.

I am based in Ankara and work on a project basis, remotely.

Capabilities

Technical areas

PCB & Layout

  • Advanced Altium Designer work
  • 2–6 layer stack-up planning
  • Impedance control and length matching
  • Design referencing IPC-2152 / IPC-2581
  • Gerber, BOM and Pick&Place production set

Embedded & Control

  • STM32 / ARM Cortex-M, AVR, Arduino
  • Raspberry Pi, Jetson, LattePanda integration
  • UART, SPI, I²C, CAN, USB
  • Modbus RTU/TCP, RS-485
  • Hardware-software integration

Power & Analog

  • SMPS: Flyback, Buck-Boost, LLC
  • Motor driver and gate driver stages
  • High-current routing and thermal design
  • Low-noise analog measurement chains
  • Galvanic isolation and protection circuits

Verification & Test

  • EMI/EMC, signal integrity, crosstalk analysis
  • LTspice, PSpice, Multisim simulation
  • Oscilloscope, logic analyzer, power analyzer
  • Prototype assembly and failure analysis
  • Test procedures and technical documentation

Tools I use

Altium DesignerKiCadProteusEasyEDALTspicePSpiceMultisimSTM32CubeIDEPlatformIOGitOscilloscopeLogic AnalyzerPower Analyzer

Experience

Work history

Sep 2026 – Present

Freelance Hardware Design Engineer

Self-employed, remote

Schematic and PCB design, design reviews, BOM preparation and hardware consulting for client projects.

Dec 2025 – Mar 2026

Project Specialist / Technical Consultant

Ministry of Transport and Infrastructure — Directorate General for EU and Foreign Relations, Ankara

Automatic passenger counting system within an EU/IPA-funded public transport project: technical specifications, supplier evaluation and technical procurement.

2019 – 2025

Founder & Hardware Engineer

ANSATEK Engineering and Consulting

End-to-end electronic hardware development, multi-layer PCB design and R&D process management. Signal and power integrity, EMI/EMC, prototyping, test and hardware-software integration.

2023 – 2024

Technology Consultant

Erzurum Technical University — Kristal Entrepreneurship Center

Technical evaluation and strategic guidance on R&D and entrepreneurship projects; university-industry collaboration, mentoring and project preparation.

2017 – 2019

Hardware Design Engineer (project based)

Electronics R&D work

Control boards, power electronics circuits, prototyping and test work.

Education

Education

In progress

MSc Electrical and Electronics Engineering

Erzurum Technical University
2016 – 2022

BSc Biomedical Engineering

Erciyes University, Kayseri

Have a hardware idea?

Let's talk through the scope and technical constraints — I'll come back with a clear picture of the steps and the time it takes.